Blow Molding Machine 1000L 4-6 1000L Schichten
1000L blow moulding machine-The screw adopts IKV design, with high potency melt to make sure the material well mixed.
-Adopt Frequenz Kontroll vun Motor System der Muecht Konsum ze reduzéieren.
-Adopt Parison thickness controller Moog 100 points, to make thickness even and adjust the tank weight in big span.
-Fully automatesch, einfach ze bedreiwen, kann zwou Fraen Bedreiwen Maschinn, ganz Produktioun Linn brauchen 3 oder 4 Persoun nëmmen.
-High Wasserstoff versus Schliesslech molding Maschinn
-Save Rohmaterial 25% - 35% versus Schliesslech Panzer.
-Perfect Impakt Resistenz versus Schliesslech Panzer.
-Multi Schichten Co-extrusion.
-Den mechanesch Aarm kann automatesch de Produit huelen eraus.
Spezifizéierung
| 项目Item |
规格Spec. |
标准规格Standard specifications |
说明Notes | |
| 平均能耗Mean energy | ||||
| 挤料装置
Extrusion system |
主螺杆规格
Main (dreiwend) gin |
80/80/80/80
FOUR LAYERS 80/80/80/80/80 FIVE LAYERS |
||
| 螺杆长径比
Loftschrauf Verhältnis |
30: 1 | |||
| 机筒螺杆材料
barrel Loftschrauf |
38GrMOALA | |||
| 最大挤出量
MAX extruder Wasserstoff |
400KG/H | |||
| 绞料传动方式
dreiwend Modus |
电机，齿轮箱，皮带传动 Motor, gear case, belt transmission | |||
| 驱动电机
fuert motoriséiert |
37/37/37/37KW
FOUR LAYERS 37/37/37/37/37KW FIVE LAYERS |
|||
| 螺杆转速
Loftschrauf Vitesse |
10-60mil | |||
| 上下调整机能
Extrait vun Up and Down |
jo | |||
| 温控段数
Temperatur Kontrolléiere |
16 FOUR LAYERS
20 FIVE LAYERS |
|||
| 加热功率
Wäermt |
60KW | |||
| 冷却风扇数Cooling fan | 16 FOUR LAYERS
20 FIVE LAYERS |
|||
| 冷却机能 Cooling system | jo | |||
| 开合模装置
Clamping Eenheetspräis |
结构形式 Structural style | 2 tie | ||
| 开合模导向Clamping direct | linear guide | |||
| 开合模速度Clamping speed | 600㎜/sce 42m/min | |||
| 最大锁板间距 MAXlocking plate spacing | 2300mm | |||
| 开模间距 Mold open spacing | 800-2300mm | Min ~ Max | ||
| 锁模力 Clamping force | 800KN | Max | ||
| 模具最小厚度 mould minimum thickness | 820～1100MM | |||
| 模具固定方式 Mould fixed form | 模具压板 Clamping cap | |||
| 开关模行程控制 Stroke control | 电子尺E-RULER | |||
| 模板外形尺寸 | 1500*1700mm | |||
| 机头形式Die head | 先进先出式储料缸First-in first-out accumulator | |||
| 模头材质 Die head material | 38GYMOALA | 料缸、内衬、料塞 Accumulator、inner liner、plug | ||
| 储料缸容积Accumulator volume | 40L or 50L | 理论值 Theoretical value | ||
| 一次射出量injection amount in one time | 28KG or35KG | MAX | ||
| 口模尺寸 Ingate size | φ230～300mm | 38GYMOALA | ||
| 加热方式 Heating Method | 电加热 Electric heating | |||
| 模头温控段数Temperature RegulationSides | 4段 4 sides | |||
| 型胚厚薄调整
Ateliere deck ajustéieren |
MOOG WALL THINKNESS CONTRAL SYSTEM | |||
| 射料行程控制
Sprëtz Schlag Kontroll |
有 yes | |||
|
厚薄调整方式 Means of adjustingthickness |
内模调整 Internal mold control | |||
| 径向调整量
Radial adjustment |
± 2.5mm | 手动 Manually | ||
| 射出压力Injection pressure | 75～140kg可调flexible | |||
| 最大射出速度
Max injection speed |
2.5kg/scc | |||
| 下吹扩展
装置 Down-Schoss Unitéit |
吹气控制方式
garde Kontroll |
时间控制 Time control | ||
| 吹针行程控制
Garde Effekt Schlag Kontroll |
电子尺E-RULER | |||
| 吹针撑料机能 Blowing needle to support the material | 有 YES | |||
|
吹针位置调整 Blowing needle position adjustment |
有 YES | |||
| 机械手
Roboter |
驱动方式
fuert Modus |
液压马达 hydraulic motor | ||
| 导向控制
an Kontroll |
导柱 Pillar | |||
| 温度控制
Temperatur Kontroll |
水 Waater | |||
| 负载保护
deene Schutz |
有 Yes | |||
| 动作控制
Kontroll Aktioun |
GmbH | |||
| 控制界面
MACKIE Kontroll |
人机介面 Man-machine operating interface | |||
| 计时设定
SetInterval |
触控荧屏 Tilt up | |||
| 油压系统
Ueleg hydraulesch System |
马达功率Motor | 37KW+7.5KW | SERVO | |
| 方向控制 Directional control | 换向阀 Reversing valve | |||
| 最大压力值Maximum pressure rating | 160Kg / ㎝ 2 | |||
| 空压系统
PNEUMATIC SYSTEM |
方向控制Directional control | 换向阀 Reversing valve | ||
| 压力控制 Pressure control | 独立式 Stand alone type | |||
| 最大压力值Maximum pressure rating | 7㎏ / ㎝, 1.1m 3/ min | |||
| 其他资料
aner Fichier |
润滑方式lubricating system | 说明书 Instruction manual | ||
| 油压冷却
Oil pressurecooling |
说明书 Instruction manual | |||
|
模具冷却 Die Killmëttel |
说明书 Instruction manual | |||
|
齿轮箱、料上座、模头冷却 Gear case，die head cooling |
||||
| 机器外形尺寸
allgemeng Dimensiounen |
L*W*H（不包括取出） | |||
| 机器重量
Machine Gewiicht |
40TON | |||
|
低压电器 Wéi gesot-Volt Staatsapparat |
Acda |
|||
|
气动元件 PNEMATIC |
CHINESE TOP Mark |
|||
|
液压元件 hydraulesch Komponent |
YUKEN |
|||
|
密封件 SEAL（Import） |
DICHTOMATIK LËTZEBUERG |
|||
|
液压马达 OLI MOTOR |
TK TAIWAN |
|||
|
油泵 OIL PUMP |
SUNNY USA |
|||
|
SERVO CONTROL |
DELTA Taiwan |
|||
|
挤出电机 Loftschrauf motoriséiert |
Acda |
|||
|
接近开关 UMGEBUNG WIESSEL |
OMRON |
|||
|
GmbH |
Acda |
|||
|
触摸屏 Touchscreens |
PROFACE Japan |
|||
|
壁厚控制器 WALL THINKNESS CONTRAL SYSTEM |
MOOG |
|||
|
变频器 Heefegkeet CONVERTERS |
ABB |
|||
|
减速机 Reduktioun BOX |
GUOMAO |
|||
|
电子尺 elektronesch Skala |
GEFRAN |
|||
|
高温熔体压力传感器 High temperature melt pressure sensor |
SAAD |
|||
|
ENERGY CONSUMPTION FOUR LAYERS |
||
|
EXTRUSION Motor POW. |
148KW |
45KW+75KW+45KW |
|
Ueleg Pompel POWER |
37KW |
|
|
Servo Pompel POWER |
7.5KW |
Getrennt FIR PARISION CONTROL |
|
Barrel Wäermt |
60KW |
|
|
SEKTIOUNSPRËSIDENT Wäermt |
70KW |
Di Heizung getrennt |
|
Killmëttel FAN POWER |
1.875KW |
0.125KW*15 |
|
TOTAL POWER |
324.375KW |
FIR ALL Energieverbrauch AKTIENGESELLSCHAFT AS |
|
Duerchschnëtt Konsum |
180KW |
FIR normalt Aarbechtsverhältnis AUTOMATESCH |
|
ENERGY CONSUMPTION FIVE LAYERS |
||
|
EXTRUSION Motor POW. |
185KW |
45KW+75KW+45KW |
|
Ueleg Pompel POWER |
37KW |
|
|
Servo Pompel POWER |
7.5KW |
Getrennt FIR PARISION CONTROL |
|
Barrel Wäermt |
60KW |
|
|
SEKTIOUNSPRËSIDENT Wäermt |
80KW |
Di Heizung getrennt |
|
Killmëttel FAN POWER |
1.875KW |
0.125KW*15 |
|
TOTAL POWER |
371.375KW |
FIR ALL Energieverbrauch AKTIENGESELLSCHAFT AS |
|
Duerchschnëtt Konsum |
180KW |
FIR normalt Aarbechtsverhältnis AUTOMATESCH |
Qualitéits-:
De Produiten a Servicer sinn mat enger Assurance vun Top Qualitéit an performant sinn feieren. Mir sinn vun engem streng Qualitéitskontroll Politik vun eiser Gestioun adoptéiert guidéiert. No der aforesaid Politik all eise Produkter sinn op verschiddene Parameteren getest hir Jans Qualitéit ze suergen.
Trainning
Buyer could dispatch their operators to the seller’s factory for training, including machine operation, maintenance & simple repairs;
Or against the requests of the buyer, the seller’s technician could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting;
The training is free of charge;
Installatioun & Upassung:
The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week in the buyer’s factory.
The buyer should make a reservation in advance before delivery of the machines;
The buyer should pay for the engineer’s visa application cost, round air tickets, food & board before his departure;
Garantéieren:
The guarantee time is one year after the machines normally works in the buyer’s factory, if only the problem is cause due to quality control or any reason by the seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.
|
|
