Tsofy 1000L koronosy Machine 1000L 4-6 sosona
1000L blow moulding machine-The screw adopts IKV design, with high potency melt to make sure the material well mixed.
-Adopt matetika rafitra fanaraha-maso ny maotera mba hampihenana ny fahefana fanjifàna.
-Adopt Parison thickness controller Moog 100 points, to make thickness even and adjust the tank weight in big span.
-Fully mandeha ho azy, mora ny miasa, ny vehivavy roa, dia afaka miasa milina, pamokarana rehetra mila 3 na 4 olona ihany.
-High Output oharina amin'ny koronosy Roto milina
-Save manta ara-nofo 25% - 35% oharina amin'ny Roto fiara mifono vy.
-Perfect fiantraikany fanoherana Roto oharina amin'ny fiara mifono vy.
-Multi sosona mpiara-extrusion.
Ilay milina sandriny dia afaka maka ny vokatra avy hatrany.
Famaritana
| 项目Item |
规格Spec. |
标准规格Standard specifications |
说明Notes | |
| 平均能耗Mean energy | ||||
| 挤料装置
Extrusion system |
主螺杆规格
Main (mitondra fiara) Sokiro |
80/80/80/80
FOUR LAYERS 80/80/80/80/80 FIVE LAYERS |
||
| 螺杆长径比
Sokiro tahan'ny |
30: 1 | |||
| 机筒螺杆材料
barika visy |
38GrMOALA | |||
| 最大挤出量
MAX extruder output |
400KG/H | |||
| 绞料传动方式
Driving fomba |
电机，齿轮箱，皮带传动 Motor, gear case, belt transmission | |||
| 驱动电机
Drive maotera |
37/37/37/37KW
FOUR LAYERS 37/37/37/37/37KW FIVE LAYERS |
|||
| 螺杆转速
Sokiro hafainganam-pandeha |
10-60mil | |||
| 上下调整机能
Hanitsy ny Up sy Down |
Eny | |||
| 温控段数
Temperature Control |
16 FOUR LAYERS
20 FIVE LAYERS |
|||
| 加热功率
fanafanana fahefana |
60KW | |||
| 冷却风扇数Cooling fan | 16 FOUR LAYERS
20 FIVE LAYERS |
|||
| 冷却机能 Cooling system | Eny | |||
| 开合模装置
Clamping Unit |
结构形式 Structural style | 2 tie | ||
| 开合模导向Clamping direct | linear guide | |||
| 开合模速度Clamping speed | 600㎜/sce 42m/min | |||
| 最大锁板间距 MAXlocking plate spacing | 2300mm | |||
| 开模间距 Mold open spacing | 800-2300mm | ~ Min Max | ||
| 锁模力 Clamping force | 800KN | Max | ||
| 模具最小厚度 mould minimum thickness | 820～1100MM | |||
| 模具固定方式 Mould fixed form | 模具压板 Clamping cap | |||
| 开关模行程控制 Stroke control | 电子尺E-RULER | |||
| 模板外形尺寸 | 1500*1700mm | |||
| 机头形式Die head | 先进先出式储料缸First-in first-out accumulator | |||
| 模头材质 Die head material | 38GYMOALA | 料缸、内衬、料塞 Accumulator、inner liner、plug | ||
| 储料缸容积Accumulator volume | 40L or 50L | 理论值 Theoretical value | ||
| 一次射出量injection amount in one time | 28KG or35KG | MAX | ||
| 口模尺寸 Ingate size | φ230～300mm | 38GYMOALA | ||
| 加热方式 Heating Method | 电加热 Electric heating | |||
| 模头温控段数Temperature RegulationSides | 4段 4 sides | |||
| 型胚厚薄调整
Parison hateviny zatra |
MOOG WALL THINKNESS CONTRAL SYSTEM | |||
| 射料行程控制
Tsindrona tapaka lalan-dra fanaraha-maso |
有 yes | |||
|
厚薄调整方式 Means of adjustingthickness |
内模调整 Internal mold control | |||
| 径向调整量
Radial adjustment |
± 2.5mm | 手动 Manually | ||
| 射出压力Injection pressure | 75～140kg可调flexible | |||
| 最大射出速度
Max injection speed |
2.5kg/scc | |||
| 下吹扩展
装置 Down-tifitra vondrona |
吹气控制方式
Blowing fanaraha-maso |
时间控制 Time control | ||
| 吹针行程控制
Blowing fanjaitra tapaka lalan-dra fanaraha-maso |
电子尺E-RULER | |||
| 吹针撑料机能 Blowing needle to support the material | 有 YES | |||
|
吹针位置调整 Blowing needle position adjustment |
有 YES | |||
| 机械手
Robot |
驱动方式
Drive maody |
液压马达 hydraulic motor | ||
| 导向控制
firaka fanaraha-maso |
导柱 Pillar | |||
| 温度控制
Temperature fanaraha-maso |
水 Waater | |||
| 负载保护
be loatra fiarovana |
有 Yes | |||
| 动作控制
Control hetsika |
plc | |||
| 控制界面
Mackie fanaraha-maso |
人机介面 Man-machine operating interface | |||
| 计时设定
SetInterval |
触控荧屏 Tilt up | |||
| 油压系统
Oil hydraulic rafitra |
马达功率Motor | 37KW+7.5KW | SERVO | |
| 方向控制 Directional control | 换向阀 Reversing valve | |||
| 最大压力值Maximum pressure rating | 160Kg / ㎝ 2 | |||
| 空压系统
PNEUMATIC RAFITRA |
方向控制Directional control | 换向阀 Reversing valve | ||
| 压力控制 Pressure control | 独立式 Stand alone type | |||
| 最大压力值Maximum pressure rating | 7㎏ / ㎝, 1.1m 3/ min | |||
| 其他资料
rakitra hafa |
润滑方式lubricating system | 说明书 Instruction manual | ||
| 油压冷却
Oil pressurecooling |
说明书 Instruction manual | |||
|
模具冷却 maty hihena |
说明书 Instruction manual | |||
|
齿轮箱、料上座、模头冷却 Gear case，die head cooling |
||||
| 机器外形尺寸
amin'ny ankapobeny lafiny |
L*W*H（不包括取出） | |||
| 机器重量
Machine lanja |
40TON | |||
|
低压电器 IVA-TOSIKARATRA fitaovana |
Siemens |
|||
|
气动元件 PNEMATIC |
SINOA TOP Brand |
|||
|
液压元件 hydraulic singa fototra |
YUKEN |
|||
|
密封件 SEAL（Import） |
DICHTOMATIK ALEMAINA |
|||
|
液压马达 OLI MOTOR |
TK TAIWAN |
|||
|
油泵 OIL PUMP |
SUNNY USA |
|||
|
SERVO CONTROL |
DELTA TAÏWAN |
|||
|
挤出电机 Sokiro Motor |
Siemens |
|||
|
接近开关 akaiky Switch |
OMRON |
|||
|
plc |
Siemens |
|||
|
触摸屏 EFIJERY KASIHINA |
PROFACE JAPON |
|||
|
壁厚控制器 WALL THINKNESS CONTRAL RAFITRA |
MOOG |
|||
|
变频器 matetika CONVERTERS |
ABB |
|||
|
减速机 fampihenana BOX |
GUOMAO |
|||
|
电子尺 Electronic maridrefy |
GEFRAN |
|||
|
高温熔体压力传感器 High temperature melt pressure sensor |
SAAD |
|||
|
ENERGY CONSUMPTION FOUR LAYERS |
||
|
EXTRUSION Motor POW. |
148KW |
45KW+75KW+45KW |
|
SOLIKA paompy POWER |
37KW |
|
|
SERVO paompy POWER |
7.5KW |
Misaraka NY PARISION PO |
|
Barika fanafanana POWER |
60KW |
|
|
LOHA fanafanana POWER |
70KW |
DIE fanafanana manokana |
|
Hihena Fan POWER |
1.875KW |
0.125KW*15 |
|
TOTAL POWER |
324.375KW |
HO AN'NY REHETRA angovo voatanisa etsy ambony |
|
SALANISAN'NY fanjifàna |
180KW |
HO AN'NY Normal MIASÀ avy hatrany |
|
ENERGY CONSUMPTION FIVE LAYERS |
||
|
EXTRUSION Motor POW. |
185KW |
45KW+75KW+45KW |
|
SOLIKA paompy POWER |
37KW |
|
|
SERVO paompy POWER |
7.5KW |
Misaraka NY PARISION PO |
|
Barika fanafanana POWER |
60KW |
|
|
LOHA fanafanana POWER |
80KW |
DIE fanafanana manokana |
|
Hihena Fan POWER |
1.875KW |
0.125KW*15 |
|
TOTAL POWER |
371.375KW |
HO AN'NY REHETRA angovo voatanisa etsy ambony |
|
SALANISAN'NY fanjifàna |
180KW |
HO AN'NY Normal MIASÀ avy hatrany |
Fiantohana kalitao:
Ny vokatra sy ny tolotra azo atao miaraka amin'ny fanomezan-toky ny ambony toetra sy ny fampisehoana. Isika dia tarihin'ny iray fanaraha-maso henjana kalitao fomba fiasa natsangan'ny ny fitantanana. Araka ny aforesaid politika ny vokatra rehetra dia notsapaina tamin'ny masontsivana samy hafa mba hahazoana antoka ny tsininy toetra.
Trainning
Buyer could dispatch their operators to the seller’s factory for training, including machine operation, maintenance & simple repairs;
Or against the requests of the buyer, the seller’s technician could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting;
The training is free of charge;
Fametrahana & fanitsiana:
The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week in the buyer’s factory.
The buyer should make a reservation in advance before delivery of the machines;
The buyer should pay for the engineer’s visa application cost, round air tickets, food & board before his departure;
Antoka:
The guarantee time is one year after the machines normally works in the buyer’s factory, if only the problem is cause due to quality control or any reason by the seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.
|
|
