Newly Arrival Bottle Edible Oil Filling Machine - 1000L Blow Molding Machine 1000L 1-3 layers – XINHENGDA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our firm aims to operating faithfully, serving to all of our shoppers , and working in new technology and new machine regularly for Accumulator Head Foaming Blow Molding Machine , Plastic Container Making Machine , Plastic Container Making Machine , Any requires from you will be paid with our best attention!
Newly Arrival Bottle Edible Oil Filling Machine - 1000L Blow Molding Machine 1000L 1-3 layers – XINHENGDA Detail:

1000L blow moulding machine

-The screw adopts IKV design, with high potency melt to make sure the material well mixed.

-Adopt frequency control of motor system to reduce the power consumption.
-Adopt  Parison thickness controller Moog 100 points, to make thickness even and adjust the tank weight in big span.
-Fully automatic, easy to operate, two women can operate machine, whole production line need 3 or 4 person only.
-High output versus Roto molding machine
-Save raw material 25% – 35% versus Roto tanks.
-Perfect impact resistance versus Roto tanks.
-Multi layers co-extrusion.

-The mechanical arm can take out the product automatically.

Specification

I. 使用条件 Working Condition

工作环境Working Envionment

车间室内使用,通风良好 Indoor, ventilated

行车高度 Bridge crane height ≥9m

车间地基混凝土10cm以上 Plant foundation Concrete ≥10cm

远离磁场 Be avoid of magic field

空气湿度 Humidity degree ≤90%

室内温度 Indoor temperature 0-45℃

电力 Power Source

三相四线 3-phase 4 wires 50Hz,380V-415V

冷却水Cooling Water

水温 Water temperature ≤20℃

水压 Water pressure  ≥0.3Mpa

水用量 Water consumption 50T/H

气源 Air Source

气源压力 Air source pressure 0.8Mpa

成型气压 Air pressure for product forming 0.2-0.4 mpa

原料 Raw Material

高密度聚乙烯 HDPE/HMW-HDPE

II. 设备概况 Overview

序号No.

项目 Item

1

挤出机 Extruder

2 套单螺杆90mm挤出机和1套100mm单螺杆挤出 机 2 sets single screw 90mm extruder and 1 set single screw 100mm extruder.

2

机头 Machine die head

50升三层储料缸式机头 50L Three layers accumulator type die head. It’s bigger than other factory.

3

合模机 Clamping Unit

三片式双拉杆合模机 3 pieces type clamping unit with 2 pull bars

4

机架 Machine Frame

升降机架 machine frame with elevator

5

上料装置Material loader

三台弹簧式上料机Three Spring feeding machine

6

气座 Blow Unit

多功能气座multifunction blow seat

7

机械手 Robert

可调节机械手adjustable robot

8

液压系统Hydraulic System

台达伺服控制主液压站+壁厚控制小液压站Delta servo main hydraulic unit and Wall thickness control small hydraulic unit

9

气动控制系统Pneumatic System

新恒达气动系统 新恒达 pneumatic control system

10

电气系统Electric System

西门子PLC电气系统 Siemens PLC electric system

11

机器功率 Power

总功率325.5 kw, 平均能耗 180kw Total load 325.5 kw with 180 average consumption

12

整机尺寸Machine Dimension (L x W x H)

8*4*6.3

13

整机重量Machine Weight

40TON

14

制品范围Product Pange

200-1000L Horizontal Tank and 1200L Vertical tank

15

塑化能力Melting Capacity

350 KGS / Hour

16

制品层数 Layers

1 to 3

LOW-VOLTAGE APPARATUS

SIEMENS

PNEMATIC

CHINESE TOP BRAND AND SMC JAPAN

HYDRAULIC COMPONENT

YUKEN

SEAL

DICHTOMATIK GERMANY AND TAIWAN DZ

SCREW MOTOR

SIEMENS

PROXIMITY SWITCH

OMRON

PLC

SIEMENS

TEMPERATURE CONTROL

SIEMENS

TOUCH SCREEN

PROFACE JAPAN

LINEAR GUIDEWAY

HIWIN TAIWAN

WALL THINKNESS CONTRAL SYSTEM

MOOG USA

FREQUENCY CONVERTERS

ABB(AC550)

REDUCTION BOX

GUOMAO

Electronic scale

GEFRAN ITILY

SERVO SYSTEM (STANDARD CONFIGURATION)

SERVO OLI MOTOR

DELTA TAIWAN

SERVO CONTRAL

DELTA TAIWAN

SERVO OIL PUMP

 SUMITOMO JAPAN

ENERGY CONSUMPTION          SINGLE LAYER

EXTRUSION MOTOR POW.

110KW

OIL PUMP POWER

37KW

SERVO PUMP POWER

7.5KW

SEPARATELY FOR PARISION CONTROL

BARREL HEATING POWER

32KW

HEAD HEATING POWER

50KW

DIE HEATING SEPARATELY

COOLING FAN POWER

0.875KW

0.125KW*7

TOTAL POWER

237.375KW

FOR ALL ENERGY CONSUMPTION LISTED ABOVE

AVERAGE CONSUMPTION

135KW

FOR NORMAL WORKING AUTOMATICALLY

ENERGY CONSUMPTION     DOUBLE LAYERS

EXTRUSION MOTOR POW.

150KW

75KW+75KW

OIL PUMP POWER

37KW

SERVO PUMP POWER

7.5KW

SEPARATELY FOR PARISION CONTROL

BARREL HEATING POWER

40KW

HEAD HEATING POWER

60KW

DIE HEATING SEPARATELY

COOLING FAN POWER

1.5KW

0.125KW*12

TOTAL POWER

296KW

FOR ALL ENERGY CONSUMPTION LISTED ABOVE

AVERAGE CONSUMPTION

160KW

FOR NORMAL WORKING AUTOMATICALLY

ENERGY CONSUMPTION    THREE LAYERS

EXTRUSION MOTOR POW.

145KW

45KW+75KW+45KW

OIL PUMP POWER

37KW

SERVO PUMP POWER

7.5KW

SEPARATELY FOR PARISION CONTROL

BARREL HEATING POWER

60KW

HEAD HEATING POWER

70KW

DIE HEATING SEPARATELY

COOLING FAN POWER

1.875KW

0.125KW*15

TOTAL POWER

321.375KW

FOR ALL ENERGY CONSUMPTION LISTED ABOVE

AVERAGE CONSUMPTION

180KW

FOR NORMAL WORKING AUTOMATICALLY

Quality assurance:

The products and services are made available with an assurance of top quality and performance. We are guided by a stringent quality control policy adopted by our management. According to the aforesaid policy all our products are tested on different parameters to ensure their flawless quality.

Trainning
Buyer could dispatch their operators to the seller’s factory for training, including machine operation, maintenance & simple repairs;
Or against the requests of the buyer, the seller’s technician could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting;
The training is free of charge;

Installation & adjustment:
The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week in the buyer’s factory.
The buyer should make a reservation in advance before delivery of the machines;
The buyer should pay for the engineer’s visa application cost, round air tickets, food & board before his departure;

Guarantee:
The guarantee time is one year after the machines normally works in the buyer’s factory, if only the problem is cause due to quality control or any reason by the seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.


Product detail pictures:

Newly Arrival Bottle Edible Oil Filling Machine -
 1000L Blow Molding Machine  1000L 1-3 layers – XINHENGDA detail pictures


Related Product Guide:
Milacron Holdings Corp. (MCRN) Moves Higher on Volume Spike for December 26 | 2000l-5 Layers Blow Molding Machine
Milacron Holdings Corp. (MCRN) Moves Higher on Volume Spike for December 26 | Automatic Blow Molding Machine

Bear "Customer 1st, Good quality first" in mind, we work closely with our prospects and supply them with efficient and professional services for Newly Arrival Bottle Edible Oil Filling Machine - 1000L Blow Molding Machine 1000L 1-3 layers – XINHENGDA, The product will supply to all over the world, such as: Pakistan , European , Sacramento , With more and more Chinese products around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to offer you both better products and service, because we are more and more powerful, professional and experience in domestic and international.
  • Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Natividad from Belarus - 2015.11.04 10:32
    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Gloria from Madras - 2016.09.09 10:18

    Related Products

    
    WhatsApp Online Chat !