1000L Blow Masini de turnare 1000L 4-6 straturi
1000L blow moulding machine-The screw adopts IKV design, with high potency melt to make sure the material well mixed.
Controlul frecvenței -Adopt al sistemului motorului pentru a reduce consumul de energie.
-Adopt Parison thickness controller Moog 100 points, to make thickness even and adjust the tank weight in big span.
-Complet automat, ușor de operat, două femei pot opera mașină, întreaga linie de producție are nevoie de 3 sau numai 4 persoane.
Ieșire -mare față de Roto mașină de turnare
materie primă -save 25% - 35% față de tancuri Roto.
Rezistenta la impact -Perfect față de tancuri Roto.
Straturile -Manual co-extrudare.
-Cele brațul mecanic poate scoate produsul în mod automat.
Caiet de sarcini
| 项目Item |
规格Spec. |
标准规格Standard specifications |
说明Notes | |
| 平均能耗Mean energy | ||||
| 挤料装置
Extrusion system |
主螺杆规格
Main (conducere) șurub |
80/80/80/80
FOUR LAYERS 80/80/80/80/80 FIVE LAYERS |
||
| 螺杆长径比
raportul șurub |
30: 1 | |||
| 机筒螺杆材料
șurub baril |
38GrMOALA | |||
| 最大挤出量
ieșire extruder MAX |
400KG/H | |||
| 绞料传动方式
Modul de conducere |
电机，齿轮箱，皮带传动 Motor, gear case, belt transmission | |||
| 驱动电机
motor de antrenare |
37/37/37/37KW
FOUR LAYERS 37/37/37/37/37KW FIVE LAYERS |
|||
| 螺杆转速
viteza şurub |
10-60mil | |||
| 上下调整机能
Ajustarea de sus și în jos |
da | |||
| 温控段数
Controlul temperaturii |
16 FOUR LAYERS
20 FIVE LAYERS |
|||
| 加热功率
puterea de încălzire |
60kW | |||
| 冷却风扇数Cooling fan | 16 FOUR LAYERS
20 FIVE LAYERS |
|||
| 冷却机能 Cooling system | da | |||
| 开合模装置
unitate de fixare |
结构形式 Structural style | 2 tie | ||
| 开合模导向Clamping direct | linear guide | |||
| 开合模速度Clamping speed | 600㎜/sce 42m/min | |||
| 最大锁板间距 MAXlocking plate spacing | 2300mm | |||
| 开模间距 Mold open spacing | 800-2300mm | Min ~ Max | ||
| 锁模力 Clamping force | 800KN | Max | ||
| 模具最小厚度 mould minimum thickness | 820～1100MM | |||
| 模具固定方式 Mould fixed form | 模具压板 Clamping cap | |||
| 开关模行程控制 Stroke control | 电子尺E-RULER | |||
| 模板外形尺寸 | 1500*1700mm | |||
| 机头形式Die head | 先进先出式储料缸First-in first-out accumulator | |||
| 模头材质 Die head material | 38GYMOALA | 料缸、内衬、料塞 Accumulator、inner liner、plug | ||
| 储料缸容积Accumulator volume | 40L or 50L | 理论值 Theoretical value | ||
| 一次射出量injection amount in one time | 28KG or35KG | MAX | ||
| 口模尺寸 Ingate size | φ230～300mm | 38GYMOALA | ||
| 加热方式 Heating Method | 电加热 Electric heating | |||
| 模头温控段数Temperature RegulationSides | 4段 4 sides | |||
| 型胚厚薄调整
Grosimea semifabricatul regla |
MOOG WALL THINKNESS CONTRAL SYSTEM | |||
| 射料行程控制
Controlul accident vascular cerebral de injectare |
有 yes | |||
|
厚薄调整方式 Means of adjustingthickness |
内模调整 Internal mold control | |||
| 径向调整量
Radial adjustment |
± 2.5mm | 手动 Manually | ||
| 射出压力Injection pressure | 75～140kg可调flexible | |||
| 最大射出速度
Max injection speed |
2.5kg/scc | |||
| 下吹扩展
装置 Jos-shot unitate |
吹气控制方式
Vârtej de control |
时间控制 Time control | ||
| 吹针行程控制
Vârtej de control accident vascular cerebral ac |
电子尺E-RULER | |||
| 吹针撑料机能 Blowing needle to support the material | 有 YES | |||
|
吹针位置调整 Blowing needle position adjustment |
有 YES | |||
| 机械手
Robot |
驱动方式
mod drive |
液压马达 hydraulic motor | ||
| 导向控制
controlul de plumb |
导柱 Pillar | |||
| 温度控制
Controlul temperaturii |
水 Waater | |||
| 负载保护
protecţie la suprasarcină |
有 Yes | |||
| 动作控制
de acțiuni de control |
PLC | |||
| 控制界面
controlul Mackie |
人机介面 Man-machine operating interface | |||
| 计时设定
setInterval |
触控荧屏 Tilt up | |||
| 油压系统
Sistemul hidraulic de ulei |
马达功率Motor | 37KW+7.5KW | SERVO | |
| 方向控制 Directional control | 换向阀 Reversing valve | |||
| 最大压力值Maximum pressure rating | 160 kg / ㎝ 2 | |||
| 空压系统
sistem pneumatic |
方向控制Directional control | 换向阀 Reversing valve | ||
| 压力控制 Pressure control | 独立式 Stand alone type | |||
| 最大压力值Maximum pressure rating | 7㎏ / ㎝, 1.1m 3/ min | |||
| 其他资料
Alte fișiere |
润滑方式lubricating system | 说明书 Instruction manual | ||
| 油压冷却
Oil pressurecooling |
说明书 Instruction manual | |||
|
模具冷却 răcire Die |
说明书 Instruction manual | |||
|
齿轮箱、料上座、模头冷却 Gear case，die head cooling |
||||
| 机器外形尺寸
Dimensiunile per total |
L*W*H（不包括取出） | |||
| 机器重量
greutatea mașinii |
40TON | |||
|
低压电器 LOW-TENSIUNE APARAT |
SIEMENS |
|||
|
气动元件 PNEMATIC |
BRAND TOP CHINESE |
|||
|
液压元件 componentă a sistemului hidraulic |
YUKEN |
|||
|
密封件 SEAL（Import） |
DICHTOMATIK GERMANIA |
|||
|
液压马达 OLI MOTOR |
TK TAIWAN |
|||
|
油泵 OIL PUMP |
SUNNY USA |
|||
|
SERVO CONTROL |
DELTA TAIWAN |
|||
|
挤出电机 SCREW MOTOR |
SIEMENS |
|||
|
接近开关 ÎNTRERUPĂTOR DE PROXIMITATE |
OMRON |
|||
|
PLC |
SIEMENS |
|||
|
触摸屏 ECRAN TACTIL |
PROFACE JAPONIA |
|||
|
壁厚控制器 SISTEM DE PERETE THINKNESS contral |
MOOG |
|||
|
变频器 convertizoarele de frecvență |
ABB |
|||
|
减速机 REDUCEREA BOX |
Guomao |
|||
|
电子尺 Cântar electronic |
GEFRAN |
|||
|
高温熔体压力传感器 High temperature melt pressure sensor |
SAAD |
|||
|
ENERGY CONSUMPTION FOUR LAYERS |
||
|
EXTRUDARE MOTOR POW. |
148KW |
45KW+75KW+45KW |
|
ULEI motopompă |
37KW |
|
|
SERVO motopompă |
7,5kW |
SEPARAT PENTRU CONTROLUL PARISION |
|
BARREL PUTERE DE ÎNCĂLZIRE |
60kW |
|
|
HEAD ÎNCĂLZIRE POWER |
70KW |
DIE ÎNCĂLZIRE SEPARAT |
|
RĂCIRE FAN POWER |
1.875KW |
0.125KW*15 |
|
PUTERE TOTALA |
324.375KW |
PENTRU TOATE CONSUM ENERGIE SUS |
|
Consum mediu |
180KW |
PENTRU NORMAL AUTOMAT DE LUCRU |
|
ENERGY CONSUMPTION FIVE LAYERS |
||
|
EXTRUDARE MOTOR POW. |
185KW |
45KW+75KW+45KW |
|
ULEI motopompă |
37KW |
|
|
SERVO motopompă |
7,5kW |
SEPARAT PENTRU CONTROLUL PARISION |
|
BARREL PUTERE DE ÎNCĂLZIRE |
60kW |
|
|
HEAD ÎNCĂLZIRE POWER |
80KW |
DIE ÎNCĂLZIRE SEPARAT |
|
RĂCIRE FAN POWER |
1.875KW |
0.125KW*15 |
|
PUTERE TOTALA |
371.375KW |
PENTRU TOATE CONSUM ENERGIE SUS |
|
Consum mediu |
180KW |
PENTRU NORMAL AUTOMAT DE LUCRU |
Asigurarea calității:
Produsele și serviciile sunt puse la dispoziție cu o asigurare a calității și a performanței de top. Suntem ghidați de o politică de control al calității stricte adoptate de managementul nostru. În conformitate cu politica menționată mai sus toate produsele noastre sunt testate pe diferiți parametri pentru a asigura calitatea lor fără cusur.
Trainning
Buyer could dispatch their operators to the seller’s factory for training, including machine operation, maintenance & simple repairs;
Or against the requests of the buyer, the seller’s technician could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting;
The training is free of charge;
Instalare si reglare:
The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week in the buyer’s factory.
The buyer should make a reservation in advance before delivery of the machines;
The buyer should pay for the engineer’s visa application cost, round air tickets, food & board before his departure;
Garanție:
The guarantee time is one year after the machines normally works in the buyer’s factory, if only the problem is cause due to quality control or any reason by the seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.
|
|
